Dolly Rigging Handle

This short rigging handle for Chapman dollies has (6) 3/8”-16 threaded holes and (6) 1/4”-20 threaded holes for any type of rigging to the Chapman push bar. Mount a monitor or baby pin or speed rail starter to any of the holes for whatever setup is needed.

There are also (4) 3/4”-16 threaded holes, 1 on the end and 3 on the handle, to mount the stock push bar extension handle if you still need extra length. The holes on the rigging handle allow you to add an extension 90 degrees to the push bar to help during dancefloor moves.

The stop nut allows you tighten the rigging handle at any angle; and handle and stop nut are both 1-1/2” and can be tightened with the stock Chapman wrench.

Handle is roughly 3” in length so you can still fit through most doorways without removing it.

Made from 6061 aluminum, black anodized.